二次镍精矿“除铁脱硫”金属化熔炼工艺研究
CSTR:
作者:
作者单位:

1.金川集团股份有限公司, 甘肃 金昌 737100 ; 2.中国恩菲工程技术有限公司, 北京 100038

作者简介:

顾明杰(1967—),男,山东聊城人,教授级高级工程师,主要从事有色金属镍、钴及贵金属冶炼工作。

通讯作者:

中图分类号:

TF815

基金项目:


Study on the “Iron Removal and Desulfurization” Metallization Smelting Process of Secondary Nickel Concentrate
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    本文通过对“富氧侧吹氧化熔炼+炉渣集中还原”周期性作业处理二次镍精矿生产金属化镍锍工艺可行性的研究,结果表明:经过集中还原处理后渣含镍由7.63%可降至0.66%,产出金属化镍锍(Ni+Cu≥76%,Fe<3%,S:16%~20%),达到了二次镍精矿的短流程“熔化、除铁、降硫”的目的。最佳工艺参数为氧料比10~45Nm3/t精矿,还原剂率为0.5%~1%。“富氧侧吹熔池熔炼+炉渣集中还原”周期作业方式可产出金属化镍锍,明显提高镍阳极板成材率,大幅提高热利用率、生产效率和产能,并降低生产成本。

    Abstract:

    This paper studies the feasibility of the process of producing metallized nickel matte from secondary nickel concentrate by periodic operation of “oxygen-enriched side-blowing oxidation smelting+centralized reduction of slag”. The results show that the nickel content in the slag can be reduced from 7.63% to 0.66% after centralized reduction treatment, producing metallized nickel matte (Ni+Cu≥76%, Fe<3%, S: 16%-20%), which achieves the goal of the short “melting, iron removal, sulfur reduction” process of secondary nickel concentrate. The optimum process parameters are concentrate with the ratio of oxygen to feed of 10-45Nm3/t and reductant ratio of 0.5%-1%. The periodic operation method of “oxygen-enriched side-blowing bath smelting+centralized reduction of slag” can produce metallized nickel matte, significantly improve the product yield of nickel anode plates, increase the heat utilization rate, production efficiency and capacity, and reduce production cost.

    参考文献
    相似文献
    引证文献
引用本文

顾明杰,祁永峰,蔡栋元,等.二次镍精矿“除铁脱硫”金属化熔炼工艺研究[J].有色设备,2022,36(6):62-66.

复制
分享
相关视频

文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2022-06-10
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2025-11-24
  • 出版日期:
文章二维码