提铜萃余液中锌的回收
CSTR:
作者:
作者单位:

1.辽宁新都黄金有限责任公司, 辽宁 朝阳 122000 ; 2.东北大学 冶金学院, 辽宁 沈阳 110819

作者简介:

张建元(1968-),男,陕西横山人,高级工程师,主要从事黄金冶炼管理工作。

通讯作者:

中图分类号:

TF813

基金项目:


Exploring the Recovery of Zinc from the Raffinate of Copper Solvent Extraction
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对黄金冶炼企业金精矿焙烧-酸浸提铜后萃余液中含有的较多锌离子,采用“预中和-分段硫化”的工艺进行处理,以ZnS精矿的形式回收其中的锌。探明了萃余液预中和、净化及硫化过程各元素走向及影响规律,考察了各步骤工艺参数。结果表明,在室温、硫化钠过量系数为1.3、硫化pH=3.0、沉淀时间30min的工艺条件下,萃余液中Zn回收率为96.56%,沉淀产物中Zn品位为52.32%;预中和、净化除去As、Cu等杂质元素后再硫化沉锌,沉淀产物中Zn的品位为54.08%。

    Abstract:

    The raffinate of a gold smelter which adopts concentrate roasting and acid leaching for copper extractioncontains a high level of zinc ions. To recover the zinc, a process of pre-neutralization and sulfidization in stages is explored, with ZnS concentrate as the recovery product. The experiment explored the paths and the interplay of each main element through raffinate pre-neutralization, clarification, and sulfidization, and examined the process parameters in each unit operation. According to the experiment results, at room temperature and with sodium sulfate excess rate at 1.3, sulfidization pH=3.0, and precipitation lasting 30min, the Zn recovery from the raffinate reaches 96.56%, and the Zn grade of the precipitation product reaches 52.32%; after pre-neutralization and clarification for As, Cu and other impurities removal, the Zn grade of the sulfurization precipitation product reaches 54.08%.

    参考文献
    相似文献
    引证文献
引用本文

张建元,章宁,王晓歌,等.提铜萃余液中锌的回收[J].有色设备,2021,35(6):22-26.

复制
分享
相关视频

文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2021-08-02
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2025-11-25
  • 出版日期:
文章二维码