锌冶炼高铁酸浸渣预酸化-二氧化硫还原浸出研究
CSTR:
作者:
作者单位:

作者简介:

冉厚建(1989—),男,云南文山人,本科,助理工程师,主要从事锌金属冶炼工作。

通讯作者:

中图分类号:

TF813

基金项目:


Study on Pre-acidification and SO2 Reduction Leaching of High-iron Acid Leaching Slag in Zinc Smelting
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对目前SO2还原浸出工艺处理锌浸出渣存在的理论探索试验较少、工艺多样化研究不足等问题,开展了预酸化-SO2还原浸出工艺处理高铁酸浸渣试验研究,分析了提前预酸化对SO2还原浸出锌浸出率、反应时间、还原后矿浆沉降性的影响。结果显示,在浓硫酸浓度100g/L、反应温度90℃、反应时间1.5h的条件下进行预酸化,再进行SO2还原浸出反应,锌浸出率可达96%,且SO2还原段反应时间可缩短至1.5h;当预酸化硫酸浓度在90~110g/L时,还原后矿浆沉降性较好。

    Abstract:

    In view of the problems of less theoretical experiments and insufficient research on process diversification in the treatment of zinc leaching residue by SO2 reduction leaching process, the experimental study on the treatment of high-iron acid leaching residue by pre-acidification and SO2 reduction leaching process was carried out to explore the effect of pre-acidification on the zinc leaching rate of SO2 reduction leaching, the reaction time of SO2 reduction leaching section and the sedimentation of pulp after reduction. The results show that the leaching rate of zinc can reach 96% and the reaction time of SO2 reduction section can be shortened to 1.5h under the conditions of concentrated sulfuric acid concentration of 100g/L, reaction temperature of 90℃ and reaction time of 1.5h. When the concentration of pre-acidified sulfuric acid is 90~110g/L, the slurry sedimentation after reduction is better.

    参考文献
    相似文献
    引证文献
引用本文

冉厚建,张国华,李云,俞凌飞.锌冶炼高铁酸浸渣预酸化-二氧化硫还原浸出研究[J].绿色矿冶,2024,(1):40-43

复制
分享
相关视频

文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2023-07-03
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2024-06-20
  • 出版日期:
文章二维码