熔盐电解法生产3N精铝试验
CSTR:
作者:
作者单位:

内蒙古锦联铝材有限公司, 内蒙古 霍林郭勒 029200

作者简介:

刘驰(1977—),男,河南太康人,高级工程师,从事铝电解技术与生产管理,现任内蒙古锦联铝材有限公司副厂长兼总工程师。

通讯作者:

中图分类号:

TF821

基金项目:


Test on 3N Aluminum Production by Molten Salt Electrolysis
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    在常规铝电解槽上,通过采用高品质的原材辅料、优化工艺技术条件和精细化操作管理,进行熔盐电解生产3N精铝试验,并对试验存在的问题进行了探讨。试验结果表明,铝液中各杂质元素含量都有不同程度的下降,铝液达到了3N精铝的标准,说明采用熔盐电解法生产3N精铝是可行的。采用熔盐电解法生产3N精铝,生产成本较常规方法大幅降低。

    Abstract:

    In the conventional aluminum electrolytic cell, the production of 3N refined aluminum by molten salt electrolysis was carried out by using high-quality raw material and auxiliary materials, optimizing technological conditions and fine operation management, and the problems existing in the experiment were discussed. and problems in the test were discussed. The results show that the content of impurity elements in the aluminum solution decreases in varied degrees, and the quality of the aluminum solution reaches the standard of 3N aluminum, which indicates that it is feasible to produce 3N refined aluminum by Molten Salt electrolysis. The cost of 3N Aluminum production by molten salt electrolysis is reduced substantially compared with conventional method.

    参考文献
    相似文献
    引证文献
引用本文

刘驰,郭彬,王宇,等. 熔盐电解法生产3N精铝试验[J].有色冶金节能,2022,38(3):20-24,32.

复制
分享
相关视频

文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2021-12-21
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2025-11-19
  • 出版日期:
文章二维码