强化电流下500kA铝电解槽工艺探析
CSTR:
作者:
作者单位:

内蒙古锦联铝材有限公司, 内蒙古 霍林郭勒 029200

作者简介:

刘驰(1977—),男,河南太康人,本科,工程师,从事铝电解技术与生产管理工作,现任内蒙古锦联铝材有限公司副厂长兼总工程师。

通讯作者:

中图分类号:

TF821

基金项目:


Discussion and Analysis on Technical Process of 500kA Aluminum Cell under Intensified Current
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    在研究国内电解槽电流强化的空间、电流强化对电解槽热平衡和稳定性的影响的基础上,针对国内某电解铝企业500kA电解系列进行电流强化实践,探讨了电流强化后应采取的措施。在生产中,通过工艺参数调整,采用“智能打壳+槽控机”双控制系统,优化电压,保持低分子比、高铝液水平、低铝液温度及过热度等措施,500kA电解槽电流提升至518kA,电流密度从0.804A/cm2提高至0.833A/cm2,且获得了良好的热平衡及稳定性,吨铝能耗降低了152kW·h,从而论证了电解槽强化电流的可行性。

    Abstract:

    Based on study of the space of intensified current and the effect of current intensification on cell heat balance and stability,the current intensification practiced on the 500kA electrolytic cell line of an electrolytic aluminum enterprise in China was done,and the necessary measures to be taken after current intensification were discussed. During the production, by adjustment of process parameters, and the measures such as using “intelligent shelling+slot control” double control system, optimizing voltage, keeping low molecular ratio, high liquid aluminum level, low liquid aluminum temperature and superheat, the current of 500kA cell was increased to 518kA, and the current density was increased from 0.804A/cm2 to 0.833A/cm2, with good heat balance and stability, energy consumption was reduced by 152kW·h, which demonstrated the feasibility of intensified current applied on the cell.

    参考文献
    相似文献
    引证文献
引用本文

刘驰.强化电流下500kA铝电解槽工艺探析[J].有色冶金节能,2021,37(4):16-19,36.

复制
分享
相关视频

文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2021-03-25
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2025-11-27
  • 出版日期:
文章二维码