北京某工厂工业污水处理提标改造设计
CSTR:
作者:
作者单位:

湖南中集环境投资有限公司, 湖南 长沙 410002

作者简介:

易亚杰(1981—),男,湖南湘乡人,硕士,工程师,主要研究方向为水污染处理工程。

通讯作者:

中图分类号:

X703

基金项目:


Upgrading Design of Industrial Wastewater Treatment in a Plant in Beijing
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对北京某工厂原污水处理系统老旧,CODCr、氨氮、磷等污染因子的去除有限的问题,在原有系统基础上进行利旧改造,将原有中间水池、调节池、生化池、砂滤池分别改造为缺氧反硝化池、好氧+MBR池、化学除磷沉淀池、折点加氯反应池,并确定了化学除磷、折点加氯工艺的最佳药剂浓度。改造后系统出水水质稳定,达到《水污染物综合排放标准》(DB11/307—2013)要求。

    Abstract:

    The wastewater treatment system of a factory in Beijing was old ,and the removal of CODCr, ammonia nitrogen, phosphorus and other pollution factors was limited, so it was reformed in basis of the old system. The old intermediate water tank, regulation tank, biochemical tank and sand filter were transformed into anoxic denitrification tank, aerobic+MBR tank, chemical phosphorus removal sedimentation tank and breakpoint chlorination reaction tank, respectively. The optimal reagent concentration of chemical phosphorus removal and inflection point chlorination process was determined. After the transformation, the effluent quality of the system was stable, meeting the requirements of Integrated discharge standard of water pollutants (DB 11/307—2013 ).

    参考文献
    相似文献
    引证文献
引用本文

易亚杰.北京某工厂工业污水处理提标改造设计[J].有色冶金节能,2021,37(3):56-59.

复制
分享
相关视频

文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2021-02-01
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2025-11-27
  • 出版日期:
文章二维码