某重金属冶炼厂环境污染深度治理设计方案
CSTR:
作者:
作者单位:

1.五矿铍业股份有限公司, 湖南 衡阳 421513 ; 2.中国恩菲工程技术有限公司, 北京 100038

作者简介:

彭时军(1975—),男,四川简阳人,本科,工程师,长期从事有色冶炼生产技术管理和工程设计管理。

通讯作者:

中图分类号:

TF812;TF805.3

基金项目:


Discussion on the Design Scheme of Deep Treatment of Environmental Pollution in a Heavy Metal Smelter
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对某重金属冶炼厂环境集烟气、工艺烟尾气经处理后无法达到排放标准、废水处理无法实现零排放的问题,提出环境集烟气处理、工艺烟尾气处理、废水处理工艺流程的改造方案。环境集烟气处理工艺进行了新增和完善烟气捕集罩以及合理调节个抽风点位的风量等改造;工艺烟尾气处理工艺增加一级动力波洗涤系统、一级离子液吸收系统以及应急脱硫塔系统;废水处理方面则新建了处理工艺。通过对环保设施的改造,大气污染物排放实现了ρ(颗粒物)<10mg/m3ρ(SO2)<100mg/m3的排放标准,废水实现零排放。

    Abstract:

    In view of the problem that the collected flue gas and process flue gas of a heavy metal smelting plant cannot reach the emission standard after treatment, and the wastewater treatment cannot achieve zero discharge, the optimization scheme of collected flue gas treatment, process flue gas treatment and wastewater treatment were proposed. The environmental flue gas treatment process had been reformed by adding and improving the flue gas capture cover and reasonably adjusting the air volume at each pumping point. One dynamic wave washing system, one ionic liquid absorption system and one emergency desulfurization tower system were added to the process flue gas treatment process. Wastewater treatment process was newly built. Through the optimization of environmental protection facilities, the emission standards of air pollutants ρ (particulate matter)<10mg/m3 and ρ (SO2)<100mg/m3 were achieved, and the wastewater was zero discharged.

    参考文献
    相似文献
    引证文献
引用本文

彭时军,李秒.某重金属冶炼厂环境污染深度治理设计方案[J].绿色矿冶,2021,(2):62-65

复制
分享
相关视频

文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2021-02-24
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2025-11-27
  • 出版日期:
文章二维码